News
News - All
Spare Parts and Components
Do you need to order spare parts to a Galvatek Surface or Water Treatment line? Now you can place your order from anywhere at any time. Just follow the link and fill in the simple form.
Using the new form you can order spare parts and components to our plants. We expect that with this new approach we can give you a more accurate and faster response than by inquiries made by phone. Please fill in the form as complete as you can and upload photos related to your inquiry – this will significantly help us in handling your inquiry.
New HAESL Component Repair Centre operates with Galvatek Technology
Hong Kong Aero Engine Services Limited, HAESL, celebrated recently the official opening of its new Component Repair Centre of Excellence with state-of-the-art Galvatek technology at its heart.
This 13 500 m2 expansion to its existing engine repair and overhaul facility offers now more efficient and higher quality MRO services. The new facility not only expands HAESL's capacity but also enhances its service to customers in terms of productivity and turnaround time in an industry rapidly growing in Asia.
The fully automated chemical cleaning line and advanced waste water treatment plant by Galvatek were designed and fitted to HAESL’s specific requirements. Our experts were closely involved with the project all the way through from initial planning stages right away through to the construction of the service building and the design and fitting of the equipment. As a result, HAESL offers now a up-to-date repair and maintenance services for the aviation industry, rivaled by none in the region.
Attending celebrations along with the guests including the guest of honor, Mr Christopher Pratt, the Chairman of the Swire Pacific Limited and Hong Kong Aircraft Engineering Company Limited (HAECO), were also Managing Director Ulf Pråhl, Procect Manager Jarno Virtanen and Creative Manager Jani Välkky from Galvatek.
Galvatek Design and Technology raises HAESL’s MRO Service Center to a New Level of Excellence
June marked a significant milestone for the Asian aviation MRO industry as the Hong Kong Aero Engine Services Limited, HAESL, celebrated the official opening of its Component Repair Centre of Excellence. This 13 500 m2 expansion to its existing engine repair and overhaul facility is a welcomed addition to the growing demand for high quality and efficient MRO services.
The new MRO service center is fitted with state-of-the-art technology by Galvatek including fully automated chemical cleaning line and waste water treatment plant using advanced Galcont control system, especially designed for surface treatment facilities.
The advanced Galvatek technology helps HAESL to set new standards in the Asian aviation MRO. The automated cleaning line features innovative XYZ transporter enabling an effective plant layout, as the transporter can move in any direction. An integrated walk-in-spray-booth for random manual cleaning of engine parts adds flexibility to otherwise fully automatic system. Traceable reporting system leaves no room for human error and provides useful information for further development of services provided.
New plant started up at Kramo in Poland.
Galvatek has started-up modern Ni/Cr (III)-plating line at Kramo, Poland.
The plant is supplied with all state-of-art Galvatek solutions including Candovent process ventilation, Galcont control system and multi-rinsing systems. Wastewater treatment plant was included in the delivery too.The line is already in full production and it can be easily expanded for even higher production capacity for future needs.The key factor when designing the line was to meet not only all safety and environmental standards but also to make it fume hermetic. This Galvatek capability was highly appreciated by the customer.
Kramo line is the second Galvatek project using trivalent chromium plating process in Poland. The Kramo project will strengthen Galvateks position as an established supplier of plating plants in Poland.
Kramo is a leading Polish manufacturer of metal and wire products, delivering goods and services for top household and furniture suppliers.
New contract for 2011
Galvatek supplies a new automated profile anodizing and colouring plant to Purso Oy in Finland
The delivery includes both anodizing plant for profiles and a plant to treat the waste water from the process.Purso Oy manufactures aluminium parts and profiles mainly for car and construction industry.The company supplied last year some 14 000 tons of aluminium to its customers both in Finland and export markets.
The tank length is 8,8 meters and the plant can handle profile lengths up to 8 meters.The plant capacity is 2 000 000 m2 anodized profiles a year and the process includes also electrochemical colouring.The delivery includes also a waste water treatment which is also having a joint GalCont controlsystem with the anodizing plant.Besides automation special attention has been paid to ergonomic and effective material handling, energy efficiency and working environment.The plant is equipped with Candovent ventilation system and the process fumes are washed in special designed scrubbers.
The plant will be handed over to late 2011.
With the on going delivery to Sapa Profily in Slovakia Galvatek has gained two major anodizing plant supply contracts in Europe.
A new fully automated anodizing plant to Sapa Profily a.s. in Slovakia.
Sapa Profily and Galvatek have signed a delivery contract over an anodizing plant in Ziar nad Hronom, Slovakia.
The new plant is fully automated and has a tank length of 9 meters..
The capacity of the plant is 2 500 000 m2 anodized aluminium/ year and will be one of the most modern plants in the world.
Galvatek fume extraction system guarantees an outstanding working climate and saves heating energy to an optimum level. The hart of the plant is the GalCont control system controlling all vital process parameters and the
transporters including loading and unloading of the profiles.
The delivery is a turn key delivery and the plant will be operational late 2011.
Sapa group
Sapa is the leading company in its field and develops, manufactures and markets value added profiles, profile-based building systems and heat-exchanger solutions based on strip in the lightweight material aluminium.
Automated Die Tool Cleaning plant to Purso Oy in Finland
Galvatek will supply a new die tool cleaning plant to the Finnish company Purso in Siuro.
The plant and all its main functions are controlled by GalCont control system.
The hard process conditions require special mechanical solutions especially regarding the ventialtion and to prevent dangerous spillage.
High plant availability an acceptable working climate / safety are reached by paying a special attention to solve these problems.
Plating plant modernisation at Assa Abloy Rychnov factory in Czech Republic has been successfully completed.
The modernisation was made to the Cu/Ni/Cr and Zn plating plant including the WTTP that Galvatek supplied originally in 1993-1995. At that time the factory was running under the name FAB being already then one of the most significant suppliers of various locks and locking components in Czech Republic.
Since late 90’s the factory has been a member of Assa Abloy group. During the past years the production capacity has grown a lot resulting to a need to modernize also the old plating lines and processes.
Galvatek has also got long lasting relations with professional partners in Czech Republic who were strongly involved in the delivery.
Galvatek was chosen to supply the modernisation work after an international bidding process. Besides a competitive price / quality relation Galvatek experience in locking industry and from the original plant delivery were decisive factors in the supplier selection. Galvatek has also got long lasting relations with professional partners in Czech Republic who were strongly involved in the delivery.
Main scope of the work was to change the old rack – and barrel Zn plating plant to a Cu-Ni and Cr plant. The Cr process has been made according to latest standards with Cr-3 and the plant can treat also parts with Velour Ni. The modernised plant can treat both racks and barrels.
The high automation degree was accomplished with the Galvatek GalCont control system.
Galvatek 30 year anniversary
First of May 2010 Galvatek Oy has reached an age of 30 years.
A lot has happened in the surface and water treatment markets during these 30 years. A heavy restructuring in surface treatment plant suppliers on international markets has taken place and only a few of them are active today.
We are both happy and proud for the success we have had in the ever changing and competitive market and want to thank all our customers and suppliers for this success. We are looking forward for long lasting and profitable cooperation also during the coming years.
Please open our 30 year anniversary brochure to see a glimpse of our history.
Best regards
Ulf Pråhl
Managing Director
HEASL Chemical Cleaning Plant
Galvatek will supply a chemical cleaning plant to Hong Kong Aero Engine Services Limited (HAESL) in HongKong.
Hong Kong Aero Engine Services Limited (HAESL) provides world-class aero engine and component repair services to many of the world’s most respected airlines that have chosen Rolls-Royce to power their fleet of Airbus and Boeing Aircraft.
This full automated line represents the state of the art technology in engine cleaning technology...
This full automated line represents the state of the art technology in engine cleaning technology with many innovative solutions in automated parts handling, environment, working safety and flexibility. The plant will be supplied in co-operation with Jebsen&Jessen. Jebsen&Jessen and Galvatek have been partners in aviation industry over 10 years time.
The new plant should be operational in 2011. With this contract Galvatek strengthens its position as the leading supplier of automated CCL plants in aviation industry.
Earlier in 2009 Galvatek has supplied automated chemical cleaning plants to P&W / TEC in Turkey and SAESL in Singapore .
Galvatek will upgrade the CCL plant of SR Technics in Zurich .
The plant was originally supplied by Galvatek in mid 80,s and has been operating to customer’s full satisfaction already over 20 years.
Fully automatic turbine blade cleaning plant to Singapore
The client is the joint venture between Rolls Royce and Singapore Airlines, Singapore Aero Engine Services Pte Limited (SAESL).
SAESL is one of the world's leading companies in its field; its client reference value to Galvatek is great. Galvatek delivered SAESL a similar, but larger turbine blade cleaning plant in 2000.
Technically the plant represents proven Galvatek technology, which was found to best suit the client's needs. The plant will be supplied in cooperation with Jebsen & Jessen in Singapore.
Hitachi Europe GmbH places second order for a water treatment plant in Poland
Galvatek delivered the previous water treatment plant, a desulphurization line, for Hitachi's coal power plant in Poland three years ago. Customer satisfaction in the delivery and features of desulphurization line made for a solid basis for a new contract.
The new water treatment plant will clean the waste water coming from the coal power plant's flue gas desulphurization. The waste water is neutralized, and heavy metals and solids are separated. The purified water is then recycled to the environment.
Automated cleaning plant for aero engine parts
Galvatek will deliver a new fully automatic chemical cleaning plant for the joint venture between Pratt&Whitney and Turkish Technic. The plant will be installed at the Sabiha Göcken airport, approximately 60 km from Istanbul.
The contract includes all the phases of delivery, from designing the plant to the actual installation and test running of the plant. Installation work will commence during 2009.
Pratt&Whitney is one of the world's leading and most renowned aircraft engine manufacturers.
